Go CCIE Go!! - A Cisco Certified Internetwork Expert

Hi Group,
When we configure a CISCO router to announce itself as a Default gateway via IRDP, I think all we need is to configure “ip irdp” (minimum) under the LAN interface. Here I believe router acts as a server.
1. Is the IRDP client/server architecture?
2. Is this a dynamic way to tell the clients compared to […]

Dears, I need to Limit UDP by allowing a max of 512 kbps, and a normal 128 kbps, I need to do this in the switch
How can I do that?
Please help. Kindest Regards Patri.

According to the docs for the default-information-originate parameter:
“(Optional) Used to generate a Type 7 default into the NSSA area. This keyword takes effect only on NSSA ABR or NSSA Autonomous System Boundary Router (ASBR).”
HTH,
Scott Morris, CCIE4 (R&S/ISP-Dial/Security/Service Provider) #4713, JNCIE #153, CISSP, et al. CCSI/JNCI-M/JNCI-J IPExpert VP - Curriculum Development IPExpert Sr. Technical […]

Hello,
Would using ORF , which technically does not update the outbound policy fix this ?
I believe it would.
PS.
If you could re-write the question for us , that would be great I think that way all of the hard work the Brian’s do on there workbooks, stays in their workbooks.
HTH
steve
—–Original Message—– From: […]

Just log into our members’ site (http://members.internetworkexpert.com) and you can download the solutions. The solution for this task is in the solutions guide.
HTH,
Brian Dennis, CCIE #2210 (R&S/ISP-Dial/Security) bdennis@internetworkexpert.com
Internetwork Expert, Inc. http://www.InternetworkExpert.com Toll Free: 877-224-8987 Direct: 775-745-6404 (Outside the US and Canada)
—–Original Message—– From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of Naveed Khan Sent: Monday, July […]

On Monday 31 July 2006 11:14, you wrote: > Brian, > > The math behind XOR is… > Given the inputs A1 and A2 the output Y is > Y = ( (NOT A1 AND A2) OR (A1 AND NOT A2) ) > > Such expression is only true if the inputs are different… > […]

Hi,
Has any one deployed SIP-T on Cisco gateways? I searched the cisco.com but most of them are through PGW 2200.
Is there any way to point the SIP-T call directly to AS5400?
Thanks, Hooman

IP SLA has replaced the traditional RTR command-sets.
http://www.cisco.com/en/US/products/sw/iosswrel/ps5207/products_feature_ guide09186a008044d161.html
—–Original Message—– From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of Tran HOang Sent: Monday, July 31, 2006 2:58 AM To: Cisco certification Subject: About SAA vs Ip lsa
Hi group !!! I’m confuse about SAA (Cisco Service Assurance Agent) command : rtr and Service Level Agreements […]

Hello,
Please let me know the solution of task 5.3 LAB#20 volume 1. this task is missing in my Workbook solution.
* After failed negotiations b/w management groups AS200 has now refused to provide transport for AS300 to reach AS254.
* Configure AS200 to reflect this policy,but don’t use ant outbound filtering technique or the community no-export.
* Ensure […]

Hi all, I need to limit ingress traffic on a Gigabitethernet on a GSR from a source to 200 Mbit/s. So following the formula Bc=(rate/8)*1,5 this is my configuration:
rate-limit input access-group 101 200000000 37500000 75000000 conform-action transmit exceeded-action drop
unfortunately there is some hardware limitation on so large value of Bc, infact I see this message:
Adjusting […]