Go CCIE Go!! - A Cisco Certified Internetwork Expert

Hello All.
I have 2xCat6500 with 2xFWSM in them.License for 20 Contexs is activated. Contexts are used in FWSM. FWSM are in Active/Standby Failover Mode.
Problem is that we add a second FWSM into the prodaction network after we already had some clients on our first FWSM. We didn’t plan to use a second FWSM, so […]

I have a 3 interface pix outside, DMZ, and inside networks for grfrbld.com
I currently have external DNS resolving an external ips for my customers requests to my DMZ web site using static mapping (inside,outside) and an acl to allow port 80 traffic to the server.
I currently have internal DNS resolving a DMZ ip for […]

Hello,
ITTECOM, located at 8070 Georgia Ave., Silver Spring, MD 20910, has the following job opportunities available with good pay, which need to be filled out quickly:
1) VoIP Subject Expert, with expert level knowledge of Cisco IP Telephony system, prefer CCIE with CCVP 2) Senior VoIP Engineer, with strong work experience of Cisco IP Telephony system, […]

We just did this, here are your options 1. Login as service account, su to root, then execute the “passwd cisco” command to change the password. You would have had to create this.
2. If you don’t have a service account configured or have no access to that, then you’ll need to reimage the […]

My ASA Software version is 7.0(6)
Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=117287&t=117284 ————————————————– FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html

yes, cant you xmodem a small ip only image back in
(confreg 0×3922 first, for 115200)
you should have a command to xmodem an image in, and boot. OF course you will need to format the flash once booted to ios, and then properly “copy tftp bootflash” etc.
How the hell do you not have a CF card […]

thanks for the feedback guys, I really apprecaite the comments
I tried to use virtual pod, but I could not figure out what to do there, those videos are for Linux and I downloaded some files from the website but nothing happened.
I would appreciate if somebody could help me to get this virtual pod working.
cheers
Tika
[…]

Hi
I have one AIP-SSM-10 on ASA-5520 that I have forgoten it’s password. in cisco configuring AIP-SSM Document has written this command for reseting password on AIP-SSM :
hw-module module slot_number password-reset
But in my device there are’t any command such as this.
ciscoasa# hw-module module 1 ?
recover Configure recovery of this module […]

Congrats! Enjoy the success!
Regards,
Nick Sciarrilli CCIE #16602
On 9/17/06, Tim Ross wrote: > > Congratulations Jim. > > Tim Ross > CCIE# 11757 > > > —–Original Message—– > From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of > Jim > Ferens > Sent: Tuesday, August 22, 2006 12:31 PM > To: ccielab@groupstudy.com > Subject: CCIE #16755 […]

2nd,
Typically you can define a “guest-vlan” for non-dot1x compliant client or unauthenticated client and apply a very restricted ACL (deny ip any any??) on this guest vlan. And based on the authenticated user privilege/group, you have the following options:
1) Dynamic VLAN assignment - the switchport that the user machine connected and dot1x authenticated will be […]