Go CCIE Go!! - A Cisco Certified Internetwork Expert

Bobby,
Rememmber that you will need 2 route patterns per destination(Local, LD), one will block caller ID and the other will allow it, so I think route filters will be your best bet if you dont want to type to much Otherwise all should work as dexcribe
hth
JoJo
>From: “Jojo jojo” >Reply-To: “Jojo jojo” […]

Excellent!
Thanks a lot. I’m going to work on this tomorrow to see if I can get things working.
-Bobby
Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=117757&t=117741 ————————————————– FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html

Bobby,
I know there are multiple ways to get this done but here is how I got it to work
you can do this at the router pattern
9.@ with route filters or 9.1XXXXXXXXXX Partition (your partition) Description Restrict Caller ID Numbering Plan: North American Route Filter (if applied) MLPP Precendence( Default) Gateway or Route List (your […]

> Hey guys I have an idea what might be going on but wanted some other > input before I opened my big mouth. This is a client/friend of mine. Any > input? Oh IP helper is loaded in the config correctly. > > This is something I have been troubleshooting for weeks. I have […]

Thanks for the link!
Our gateway is MGCP.
I’m reading through the link that you sent, but can you explain how you set it up so that they dial 9?
-Bobby
Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=117755&t=117741 ————————————————– FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html

Jesus,Thank you!
I’m leaning towards san jose/san francisco california.
Thanks again to those who replied.
Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=117738&t=117738 ————————————————– FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html

Ok,
I’m pretty sure this is a common thing to do, but I haven’t been able to figure out how to do it yet. We have an HR person who needs to have her phone number blocked from the caller id’s of the people she’s calling. I thought this would be the External Phone Number Mask, […]

There could be any number of reasons for the latency. I don’t know how your network is set up or what type of circuits you have, but here are a couple of things you can check.
1. If you’re using site to site vpn then you might want to check that you’re using pre-fragmentation. I’ve seen […]

Cisco has an IOS which addresses the issue.
For a quick fix I am considering:
Upgrade 1 router, making this router the NTP server, have all the other routers, ASA5520’s and switches configured to point to this router as their NTP Server.
Anyone see any flaws in this solution?
Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=117748&t=117748 ————————————————– FAQ, list archives, and […]

Any time that I have a problem that seems to be application-specific or at least varies between classes of applications, the first thing I want is Ethereat/Wireshark trace files of good and bad transactions. The difference will often jump out at you in some meaningful way. Plus, protocol analysis is about the most […]