Go CCIE Go!! - A Cisco Certified Internetwork Expert

Hi Chan,
As the BGP session ISP trying to establish is pointing to a different IP, all those packets are dropped & not processed by your router. I believe no BGP debug commands will interpret those packets.
One way to force the router to “process” those irrelevant BGP packets is to set up an access-list and apply […]

Hello Joseph,
Thanks a lot for the examples. I appreciate taking the time for that. However, for the 44 example you meant 3,4, and 6 right? Regards,
From: shinepjoseph@iprimus.com.auTo: mike.haddad@hotmail.com; ccielab@groupstudy.comSubject: RE: Multicast GroupingDate: Mon, 31 Mar 2008 12:07:16 +1100
Mike,
No. you can ahave any value from 0 to 255 for the wild cards. […]

When Seeking jobs do people with CCIE 2X really notice a difference? I mean I see alot of jobs CCIE ONLY but heck if your a CCIE or a CCIE 2X will it really help with looking for that next contract?
Dane
On Fri, Feb 22, 2008 at 2:30 PM, Colin McNamara wrote:
> Its funny […]

On a 3560 when do I use a dst-ip v/s a dst-mac for port-channel load balancing. What do I need to look for in the question to use one as opposed to the other? Should I be looking for frames/packets terminology.
Thanks

! how about: ! interface f0/1 speed 10 full-duplex ! In the Switch connected to F0/1 SW-X ! int f0/6 speed 10 duplex full !
OR
SW-X int f0/6 storm-control unicast level 10.00
OR
SW-X ! int f0/6 srr-queue bandwidth limit 10
…. try that and let us know.
HTH, Daniel
On Mon, […]

I am having an issue with an ASA5505 and a Westell 2200 DSL modem. I obviously have a static IP assigned to the outside VLAN and that is working fine (I can ping it from the outside, etc.). All translations that and dynamic are moving inside/out properly, etc. I am not able to use the […]

Hi Expert,
Is there any BGP debug command to discover the eBGP peer’s configured neighbor address?
For example, Actual IP address: R1 (202.1.1.1) AS 100 ISP_R (202.1.1.254) (AS 200)
BGP R1 (neighbor 202.1.1.254 remote 200)
*Hidden config from internal network admin* BGP ISP_R (neighbor 202.1.1.100 remote 100)

Hi Joseph,
If I do not use any QoS feature (eg LFI), do I still need to enable fragmentation? Meanwhile, my configuration (without FRTS) is still working by using simple PING test. How can I discover the potential problem if not enabling FRTS?
Appreciate if you could share the experience with me.
Regards, CH
On Mon, Mar 31, 2008 […]

Hi,
Can u guys help with a solution for the AUTO-QOS
Q>configure WRR following below about traffic forwarded through fastethernet 0/4 on sw2 Queue 1 :Cos(6,7)Queue 2 :Cos(4,5)Queue 3 :Cos(2,3)Queue 4 :Cos(0,1) According to the above table, mapping Cos in each Queue???? _________________________________________________________________ Technology : Catch up on updates on the latest Gadgets, Reviews, Gaming and […]

Please put your input for the Question ; ( it doesnt seems to work ; )
Allocate 10Mbps on the fasethernet 0/1 interface on R6 for traffic coming form Backbone 2 and Backbone 3 Answer SW1(config)#class-map match-all from-bb2-bb3 config-cmap# match input-interface fa 0/1 config# policy-map Ratelimit config-pmap# class from-bb2-bb3 config-pmap-c# police 100000000 […]