Go CCIE Go!! - A Cisco Certified Internetwork Expert

Here is a link to the online power calculator: http://tools.cisco.com/cpc/launch.jsp
WS-C6509-E-FAN + Sup720 w/ power reserve for redundant Sup is about 714watts. Here is from what I saw from a 6509-E chassis:
1 WS-C6509-E-FAN 150.36 3.58 OK
5 WS-SUP720-3B […]

If you are using diff wattage you have to use non redundant sorry should have clarified that.
On Mon, Jun 30, 2008 at 8:13 PM, Anthony Faria wrote:
> I think the 2500watt ones are actually 1400 watts on 110 and they are 2500 > watts when you run them on 220. I cant remember for […]

I think the 2500watt ones are actually 1400 watts on 110 and they are 2500 watts when you run them on 220. I cant remember for sure. I know the 3000 watt ones work like that. We run 3000 watt with the 2500 in non redundant mode. You can do a show power to see […]

Hah, it’s going to take me a month everyday after work to complete that. Owning a house has it’s pros and cons, that’s for sure.
Dale
On Mon, Jun 30, 2008 at 5:28 PM, Hoogen wrote:
> I am still single.. do any of the vendors offer a bootcamp to teach all > that.. that sounds […]

Congratulations …………. We already knew that
-Azher
On Mon, Jun 30, 2008 at 2:28 PM, Hoogen wrote:
> I am still single.. do any of the vendors offer a bootcamp to teach all > that.. that sounds tougher to do list than doing a CCIE. > > Bet you took more than 4 hrs to do […]

Hi Antonio,
For the first point - it discusses if redundant.
I believe the second point is valid only if the PS are to be combined (that is: nonredundant).
If you are using redundant mode - both PS must be same wattage (but can be a mix of AC & DC). In combined mode, the 2 PSs […]

I think i found the answer. It depends if we are using redundancy (power redundancy-mode redundant) or not (power redundancy-mode combined).
http://www.cisco.com/en/US/docs/switches/lan/catalyst6500/ios/12.2SXF/native /configuration/guide/pwr_envr.html#wp1020384
Thanks.
Regards,
Antonio Soares, CCIE #18473 (R&S)
—–Original Message—– From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of Antonio Soares Sent: terga-feira, 1 de Julho de 2008 0:23 To: ‘Cisco certification’ Subject: OT: Catalyst 6500 PS Combinations
Hello group,
Sorry for […]

http://www.juniper.net/techpubs/software/erx/junose700/swcmdref-a-m/frameset.htm same command.
On Mon, Jun 30, 2008 at 7:27 PM, rom raj wrote:
> Hi Group, > > There is a cisco command “bgp fast-external-fallover” to enable the fast > bgp > convergence. What is its equivalent command in Juniper JUNOS? > > Thanks, > Rom > > > _______________________________________________________________________ > Subscription information may […]

http://www.cisco.com/univercd was the home page in my lab 2 weeks ago. The proctor told us to let him know if there were any links unavailable and he would add them to the allowed list after confirming that they are relevant to the lab. Apparently it takes about 15min to take effect. All the links I […]

Hi Group,
There is a cisco command “bgp fast-external-fallover” to enable the fast bgp convergence. What is its equivalent command in Juniper JUNOS?
Thanks, Rom