Go CCIE Go!! - A Cisco Certified Internetwork Expert

can you establish bgp neighbors with ebgp-multihop, could you be going over more then one hop maybe?
—– Original Message —– From: Muhammad Nasim To: CCIEDAVITO CCIEDAVITO Cc: ccielab@groupstudy.com Sent: Thu, 31 Jul 2008 21:55:14 -0400 (EDT) Subject: Re: Interesting problem (HELP, please)
Can u please post debug of EIGRP and BGP on both

2008/8/1 CCIEDAVITO CCIEDAVITO
> Have any of you ran into the following problem? > > We have two Cat6500 (Sup720) running IOS Natively > They are connected across a WAN (essentially, a bridge, with a number of > players in the middle, handed off as RJ45 at both ends) > > Their connected interfaces are addressed with a /30 network, and can ping > each other (1500 byte packets flow across fine) > > With Static routes configured on both ends, end user devices and servers > can > talk to devices across the link without an issue > We cannot establish an EIGRP neighborship across this link > We cannot establish a BGP neighborship across this link > If I telnet from one switch, to the other, I get connected, but never get a > prompt to login, and eventually loose the telnet session. > > If any of you have any thoughts about this, I’d be glad to hear them. > > Thanks. > > > Blogs and organic groups at http://www.ccie.net > > _______________________________________________________________________ > Subscription information may be found at: > http://www.groupstudy.com/list/CCIELab.html > > > > > > > >
— Muhammad Nasim Network Engineer Saudi Arabia
Blogs and organic groups at http://www.ccie.net